What can I do if I need to scan challenging surfaces but can’t use permanent 3D scanning spray?
In our previous blog post, How to Scan Dark, Shiny, or Clear Surfaces with a 3D Scanner [With Video Demo], we covered why and how some surfaces are more challenging to scan than others using an optical 3D scanner. These include dark, shiny, transparent surfaces, as well as holes and pitted areas.
To help you get the best results, we recommended spraying the part with a developer spray to cover challenging surfaces with a white coating. It’s a temporary coating that easily comes off. You can wipe off the spray with a cloth after the part is scanned.
Since the article was published, our team has been getting questions on YouTube as to what would be the best solution if a surface can’t be cleaned.
Challenge
![youtube logo](jpg/logo-youtube.jpg)
Questions from Video:
How to Scan Dark, Shiny, or Transparent Surfaces with a 3D Scanner
![youtube quote](jpg/article-aesub-spray-youtube-quote.jpg)
![youtube quote](jpg/article-aesub-spray-youtube-quote-2.jpg)
Solution
Luckily, now there’s a solution that can help you out if you run into any of these situations. The AESUB Blue vanishing 3D scanning spray was developed and approved by 3D scanning experts for scanning challenging surfaces (reflective, clear, dark, and difficult to reach pitted areas).
What’s special about this spray is that It leaves no mess and disappears without a trace after your 3D scanning job is complete.
It’s especially great for projects where you are:
- 3D Scanning Fragile Parts: Working with scan parts that cannot be sprayed or cleaned. AESUB Blue uses a special, evaporating formula that requires no cleaning, won’t stain your surfaces, or affect your product.
- Doing Quick Jobs: Great for doing quick jobs where you only need to scan the part for a short period of time as the spray will vanish with time (within a few hours). No need for cleanup!
![Scan comparison](jpg/article-aesub-spray-scan-comparison.jpg)
![Spray Scan Done](jpg/article-aesub-spray-spray-scan-done.jpg)
How It Works: A Step-By Step Guide
![step by step](jpg/article-aesub-spray-step-by-step.jpg)
Here is a step-by-step tutorial of how to 3D scan a reflective part using AESUB Blue 3D scanning spray.
![spray](jpg/article-aesub-spray-step-by-step-1.jpg)
![scanning](jpg/article-aesub-spray-step-by-step-scan.jpg)
![scanning](jpg/article-aesub-spray-step-by-step-scan-2.jpg)
![wait for spray to fade](jpg/article-aesub-spray-step-by-step-fade.jpg)
![wait for spray to fade](jpg/article-aesub-spray-step-by-step-fade-2.jpg)
![scan data](jpg/aesub-blue-3d-scanning-spray-completely-disappear.jpg)
![scan data](jpg/article-aesub-spray-step-by-step-scan-data-1.jpg)
![scan data](jpg/article-aesub-spray-step-by-step-scan-data-2.jpg)
How Long Will It Take for the Spray to Vanish?
It would depend on the following factors:
- How much you sprayed
- How big your part is
- Airflow (wind speed across a part – under AC vent vanishes faster)
- Environmental and temperature conditions
Tip: You should use the following videos as a guideline for how long it would take for your part in consideration. If you want the coating to last longer on a part, you should reduce the airflow in the room or put it in a closet to slow down the pace of sublimation.
AESUB Blue Vanishing Spray Analysis
-
Analysis of Spraying the Part Versus Untreated Surface
To better understand the technical aspect of the layer’s thickness and homogeneity of the AESUB coating, we did our own analysis. Check out the video:
Takeaway: Due to the nature that optical 3D scanners use projected light source in the 3D scanning process, the results will be affected by challenging surfaces to a certain degree when left untreated. While AESUB Blue vanishing spray adds ~8-15 microns of thickness to the part’s surface, it provides a consistent layer that aids the 3D scanner in capturing the true nature of the part, without the distortion caused by the challenging surface.
-
Analysis of Spraying the Part with AESUB Blue Versus Comparable Product
The manufacturer of AESUB Blue conducted its own lab testing by comparing spraying a surface with AESUB Blue (left) and a CCD vanishing spray previously used in measurement technology (right). The measurement shows a 3D scan of a glass sphere with a diameter of approximately 130 mm.
Takeaway: As you can see from the image, AESUB Blue provides a consistent scanning surface compared to a similar product. The sprays provide a thin and homogenous coating—leaving a clean, smooth, and even application with no clumps left behind.
Another amazing quality of this spray compared to other products out in the market is that it’s less toxic.
-
Residue Analysis
An examination of AESUB Blue for potential residues.
Figure 1: Product sprayed onto a glass plate coated with aluminum foil Figure 2: Coated glass plate from Figure 1 after sublimation of the product Takeaway: AESUB Blue provides neither recognizable nor measurable residues and therefore be regarded as residue-fee.
Recognized for Innovation
There’s no other 3D scanning spray out there quite like it. The AESUB Blue vanishing 3D scanning spray is so revolutionary that it recently landed on Develop3D’s D3D 30 List which features 30 new technologies that give 2020 product development work a major boost.
![develop3d logo](jpg/logo-develop3d.jpg)
“The AESUB’s response is a spray that gives your target a consistent, non-reflective white coating, enabling the scanner to grab all the details you need. Coating disappears overnight, leaving no sticky mess to clean up – it’s like magic in a can.”
– Excerpt from Develop3D.com
What If I Need a Permanent Spray?
![aesub white spray](png/aesub-white-self-vanishing-spray-can.png)
There are still times when your 3D scanning project can last for more than a few hours to even a couple of days. AESUB has a permanent alternative called AESUB White that provides similar benefits to AESUB Blue except it’s a permanent spray.
Buy Now
* Currently available for shipping to the US only